Description
Sonus Faber OLYMPICA NOVA III – walnut fits perfectly into your home and your sound.
Sonus Faber OLYMPICA NOVA III – a masterpiece of Italian audio technology
Sonus Faber OLYMPICA NOVA III – Walnut is a masterpiece of Italian audio technology that combines superior sound and aesthetic perfection. This three-way floorstanding speaker is designed with audiophiles in mind who appreciate both sound quality and design.
Olympica Nova III features an asymmetrical lute-shaped design that improves acoustic properties and reduces internal resonances. The cabinet is crafted from hand-selected natural materials, including wood and leather, giving the speaker a sophisticated and elegant look. The wood veneer is carefully crafted to ensure visual appeal and durability. SpredThe top panel is covered with leather, which surrounds the tweeters andredNewtonian speakers, thereby increasing acoustic accuracy.
Sonus Faber OLYMPICA NOVA III – technical highlights
- System: Three-way floor-standing speaker
- Frequency response: 35 Hz – 35.000 Hz
- Sensitivity: 90dB SPL (2.83V/1m)
- Impedance: 4 ohms
- Tweeter: DAD (Damped Apex Dome) tweeter, 28 mm
- Srednetonal: 150 mm cellulose cone speaker
- Subwoofer: Two 180 mm speakers with aluminum diaphragm
Available in three colors:
- Walnut wood / Italian leather
- Wenge wood / Italian leather
- Black (Piano black) / Italian leather
Like the sides of the cabinet, theredThe partition and top are made of walnut or wengé hand-finished natural wood, mounted on a solid die-cast aluminum plate. Designers Sonus faber they wanted to pay homage to the most representative material Sonus faber and so onredto go even more flag-bearer.
Tweeter
The 28mm silk dome tweeter features DAD™ (Damped Apex Dome™) technology, which improves high frequency smoothness and extension by using local damping at the apex, which is typically responsible for the anti-phase behavior of soft dome diaphragms. The DAD™ structure has been completely redesigned; a solid piece of die-cast aluminum incorporates an arch and ring on the dome to increase the rigidity and accuracy of the system.
Crossover
The crossover network implements Paracross Topology™, which makes the crossover less susceptible to RF interference, improves transient response, and reduces noise. The filtering topology includes new exclusive Clarity Cap capacitors, tailored for Sonus faber.
Srednewton
Srednjetonec is entirely designed and developed in laboratories Sonus faberHis cone was created in collaboration with Kurtmueller and predputs the mostreda higher level of the traditional recipe Sonus faber: an air-dried, uncompressed blend of cellulose pulp and other natural fibers: kapok and kenaf. This natural drying process gives the diaphragm a slightly rough surface of varying density and contributes to damping and distributing cone resonances, while ensuring a natural sound, greater transparency and detail. The valuable phase plug increases the transmission withredtheir high frequencies, while also proudly stating that the collection is Olympica Nova made in Italy.
Woofer
The woofer cone was developed in collaboration with Kurtmueller and is based on an exclusive sandwich construction technique: two outer layers of cellulose pulp are combined with a layer of high-tech syntactic foam in between. This low-mass, high-rigidity cone construction enables perfect reproduction of low frequencies while ensuring absolute tonal consistency withredtons. This converter is assembled in Italy.
Structural rigidity
Similar to the Homage Tradition and Reference Collections walls are made of eight layers of bentwood, giving the cabinet exceptional rigidity. Inside the cabinet, carefully placed structural ribs are used as reinforcement to reduce vibration and to handle the full force of the transducers' movement.
Natural leather
Natural leather adorns the Voice of Sonus faber, the iconic tweeter configuration and withredof the brand's new speaker. Genuine leather, which, in keeping with their brand's tradition, is applied by hand in the production department in Vicenza.
Stealth Ultraflex™ system
A solid piece of extruded aluminum that complements the Stealth Ultraflex™ system, an ultra-low turbulence door system inherited from the Homage Tradition models. It givesredprofile of the sea waves, the structure facilitates the flow of air through the channel, while at the same time nadIt speeds up its speed and reduces the turbulence that causes distortion.
Support beams
Sonus faber has carefully redesigned the brackets and made them from solid aluminum bottom plates with steel spikes, drawing inspiration from the Homage Tradition and Reference Collections to provide greater strength and durability.
TECHNICAL DETAILS
- Speaker type: Three-way floor-standing speaker
- Frequency response: 35 Hz – 35.000 Hz
- Sensitivity: 90 dB SPL (2.83V/1m)
- Nominal impedance: 4 ohms
- Recommended amplification: 50W – 300W without distortion
- Tweeter: 28 mm DAD (Damped Apex Dome) tweeter
- Srednjetonec: 150 mm speaker made of cellulose pulp and natural fibers
- Woofer: Two 180 mm speakers with aluminum diaphragm
- System for nadAirflow: Stealth Ultraflex
- Structural strength: Eight-ply bentwood body with internal reinforcements
- Dimensions (H x W x D): 1094 mm x 388 mm x 427 mm
- Weight: 44 kg
SONUS FABER:
Sonus Faber is a reputable Italian company specializing in the production of high-quality audio devices, predall speakers. It was founded in 1983 in Arcugnano, near Vicenza, by Franco Serblin. The company is known for its predA passion for handcraft, aesthetics and engineering perfection.
Vision and Mission:
Vision Sonus Faber is to create audio equipment that not only reproduces sound, but also elevates it to the level of art. Their mission is to produce speakers that combine technical sophistication with timeless design aesthetics, relying on traditional manufacturing methods and natural materials.
Design Philosophy:
Sonus Faber strives to use natural materials such as wood, leather and metal in the design of its products. Each product is carefully designed and handcrafted to ensure not only superior audio performance but also aesthetic perfection. Their speakers are often reminiscent of musical instruments, further emphasizing their commitment to art and sound.
Innovation and Technology:
The company continuously invests in research and development to remain at the forefront of audio technology. Innovations such as DAD (Damped Apex Dome) tweeters and unique speaker drivers set the standard for Sonus Faber among the leading names in the audio industry.
Sonus Faber remains synonymous with superior sound, hand-crafted craftsmanship and elegant design. With a long tradition and continuous innovation, the company is cementing its place among the best audio equipment manufacturers in the world.
DO YOU WANT ADVICE • DO YOU HAVE A QUESTION?
AV PLANET audio video specialists
e-mail: info@av-planet.si
phone: 051 436 500
url: www.av-planet.si
Hi Fi • Home Cinema • TV • Projections • Shop • Showroom • Design and implementation
Need more information about the speaker? Visit the official manufacturer's website Sonus faber
